MAHLE MOTORPSORT MAIN BEARINGS

Description

The new MAHLE Motorsport range of bearings contains technology that has been transferred from MAHLE’s F1 bearing technology.

The big end bearings in Mahle's motorsport range are manufactured with a “racing notch” which maximizes the cross-sectional area for good interference fit and eliminates disruption to the bearing bore and consequently to the all-important oil film.

Now identified with laser marking as an alternative method to stamping which creates smaller, more consistent markings which does not distort the backing and as such does not disrupt the back contact and subsequent heat transfer.

Only available in std / std in the following;

Early 2.000" mains order as 91120 - all side tag location with oil groove

Late 2.000" mains order as 91886 - 3 x side tag location with oil groove and 3 x centre tag location with no oil groove.