{"title":"Suspension \u0026 Brakes","description":"Mini suspension components and packages for fast road, track and competition. Our high quality suspension components are machined in the UK for the ultimate upgrade.","products":[{"product_id":"performance-rubber-spring","title":"PERFORMANCE RUBBER SPRING","description":"\u003cp\u003eHigh performance rubber spring for the classic Mini, which comes recommended for anything more than a standard road car.\u003cbr\u003e\u003cbr\u003eThere are two spring rates - red for fast road, rally and track; yellow for full competition. \u003cbr\u003e\u003cbr\u003ePriced as an individual spring, although must be fitted in axle pairs. \u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Yellow","offer_id":44459915837733,"sku":"MED-6671-YC","price":68.5,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":44459915968805,"sku":"MED-6670-RC","price":68.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6671-yc1.jpg?v=1676572540"},{"product_id":"med-competition-driveshaft-kit","title":"MED COMPETITION DRIVESHAFT KIT - HARDY SPICER","description":"\u003cp\u003eThe MED Competition Driveshaft Kit is the ultimate upgrade package for your standard driveshafts, for fast road or competition usage.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe kit is aimed at those using 10-inch wheels with Hardy Spicer-type output shafts. If you're running a standard differential or ATB and have pot joint outputs, we can supply the adapters to suit. We can also supply LSD-type splined adapters.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eChoose from the options above if you wish to add the output shaft adapters to suit. \u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eKit contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eMED heavy-duty 300M driveshafts\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eMED heavy-duty Hardy Spicer couplings\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eHigh quality 1275 CV joints\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eCompetition EN24T drive flanges\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eMED Competition CV joint nuts and washers\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eMED Hardy Spicer coupling bolt kit\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOptional output shaft adapters to suit pot joints or LSD \u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"MED Engineering","offers":[{"title":"Driveshaft kit","offer_id":44459932287269,"sku":"MED-3910-HDK","price":950.0,"currency_code":"GBP","in_stock":true},{"title":"Plus pot joint adapters","offer_id":44459932352805,"sku":"MED-3911-CDK","price":1150.0,"currency_code":"GBP","in_stock":true},{"title":"Plus LSD adapters","offer_id":44459932418341,"sku":"MED-3912-CDK","price":1150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-3910-cdk1.jpg?v=1682606340"},{"product_id":"level3-handling-pack","title":"MED LEVEL 3 HANDLING PACK","description":"\u003cp\u003eThe MED Level 3 handling pack includes a pair of our heavy-duty adjustable lower arms, tie-rods and ride height adjusters. There's also a complete set of four competition rubber springs in a choice of compounds. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe now include new fixings to connect the tie-rods to the lower arms.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit will allow you to precisely set both the caster and camber angles of the front suspension, while also adjusting ride height and corner weights. This is key to maximising grip, increasing cornering speed and stability under braking.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe yellow dot cones are firmer than red and are ideal for cars on slick racing tyres. Red dot are still firmer than stock, and are recommended for all other competition and trackday Minis.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined alloy height platforms with stainless adjusters and shafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegral 10mm hex sockets for on-car adjustable ride height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft grade, Teflon-lined steel rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack phosphate coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower arms adjustable in situ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong taper beam tie-rod design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel front tie-rod spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTie-rods machined from EN24T steel billet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial fixing bolts to connect tie-rods to lower arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is aimed primarily at trackday and competition cars where solid rod ends are desired for ultimate precision over comfort. Tested in full race conditions on a front-running Mini Miglia (10-inch slick tyre circuit racer) with great success.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo adjust ride height in situ with 10mm hex bar, you will need to drill the front tower bolts and lightly modify the rear subframe\/valance panel. Please contact us for further advice. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e is a handy for precision DIY setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Red","offer_id":44459965055269,"sku":"MED-6733-HPR","price":830.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":44459965284645,"sku":"MED-6733-HPY","price":845.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6733-hp.jpg?v=1676574716"},{"product_id":"drive-flange","title":"COMPETITION DRIVE FLANGE","description":"\u003cp\u003eThe MED competition drive flange is made to the same dimensions as the original Cooper S types, but machined from upgraded EN24T steel and then heat treated for better longevity. \u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThese only suit cars using the 7.5-inch front discs and 10-inch wheels, as the later 8.4-inch disc cars used an alternative bolt-on design.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44459994317093,"sku":"MED-3903-DF","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-3903-df2.jpg?v=1676571973"},{"product_id":"cv-joint-1275","title":"MINI OUTER CV JOINT","description":"\u003cp\u003eThese constant velocity joints are the best available and come complete with hub nut, gaiter and circlip.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eFor higher performance applications, we would strongly recommend upgrading the supplied nut to an \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/replacement-mini-hub-nut\"\u003eMED EN24 steel hub nut\u003c\/a\u003e, which is a far better quality replacement. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAlthough marked up as '1275', these will suit all Minis with 7.5-inch Cooper S or later 8.4-inch discs. \u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003eTorque to 193 lb.ft and tighten to the next available split pin hole.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"CV joint only","offer_id":55469043548545,"sku":"MED-3904-CV","price":37.5,"currency_code":"GBP","in_stock":true},{"title":"Plus MED EN24T hub nut","offer_id":55469043581313,"sku":"MED-3904-CV + MED-3906-HN","price":62.5,"currency_code":"GBP","in_stock":true},{"title":"Plus MED hub nut and split washer","offer_id":55469043614081,"sku":"MED-3904-CV + MED-3906-HN + MED-3905-SW","price":77.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/files\/IMG_2115.jpg?v=1774449157"},{"product_id":"hub-nut-split-washer-for-cv-joint","title":"MED HUB NUT WASHER FOR CV JOINT - EN24T","description":"\u003cp\u003eUnique to MED, our CV tapered washer is machined from billet EN24T and then ni-tempered for greater tensile strength and rigidity.\u003c\/p\u003e\n\u003cp\u003eThese ideally accompany the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/collections\/drivetrain\/products\/mini-hub-nut\"\u003eMED EN24T Mini hub nut\u003c\/a\u003e, but you can use them with the standard nuts too.\u003c\/p\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44459996217637,"sku":"MED-3905-SW","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/img_1887.jpg?v=1676572127"},{"product_id":"rose-petal-wheel-4-75-x-10-black-silver","title":"ROSE PETAL WHEEL SET - 4.75\" x 10\" BLACK\/SILVER","description":"\u003cp\u003eRose Petal 4.75\" x 10\" alloy wheel set - a 1960s design reproduced for many years now to meet the demands of historic Mini racing. Primarily a racing wheel for pre-1966 Minis, these have proved to be extremely popular for both race and road cars of all eras. \u003cbr\u003e\u003cbr\u003eThey have the correct offset for use with 7.5\" Cooper S discs but should fit over most 7.5\" four-pots with the supplied spacers and longer nuts (two sets of nuts are supplied per wheel).\u003cbr\u003e\u003cbr\u003eThe wheels do not require arch extensions, but narrower Group 2 arches may look good, depending on your tyre and brake choice.\u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eET+40 offset\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e4.75 x 10\"\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003e2.98kg\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOpen-ended stainless steel nuts\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eSupplied with spacers for road use\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003ePlease note - when using on historic cars without the supplied spacers, double check the clearance to the brake caliper bleed nipples.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44459997364517,"sku":"MED-6800-RP","price":600.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6800-rp1.jpg?v=1676572182"},{"product_id":"med-heavy-duty-adjustable-tie-rods","title":"MED HEAVY DUTY ADJUSTABLE TIE-RODS","description":"\u003cp\u003eMED heavy-duty adjustable tie-rods for the classic Mini, complete with \u003cmeta charset=\"utf-8\"\u003eaircraft-grade motorsport rod ends for superior durability and precision.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur unique design of heavy-duty front tie-rods allow you to perfect caster angle and improve handling. Machined from EN24T steel billet, this taper beam design strengthens the tie-rod at the weakest point, which is where the tie-rod joins the bottom arm.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty race-spec tie-rods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eAircraft grade, Teflon-lined steel rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack phosphate coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel front spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes special lower arm fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are aimed primarily at trackday and competition cars where solid rod ends are desired for ultimate precision over comfort. Tested in full race conditions on a front-running Mini Miglia (10-inch slick tyre circuit racer) with great success.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe tie-rods are prepared with a special black phosphate coating for improved longevity and are also fully rebuildable.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlso see the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e for precision setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460003131685,"sku":"MED-6451-TR","price":200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6451-tr_2.jpg?v=1676572490"},{"product_id":"adjustable-lower-arms","title":"MED ADJUSTABLE LOWER ARMS","description":"\u003cp\u003eMED heavy-duty adjustable lower arms for the classic Mini, complete with aircraft-grade motorsport rod ends for superior durability and precision.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe lower arms, supplied as a pair, are fully adjustable on car for precise front camber setup and are aimed primarily at trackday and competition cars where solid rod ends are desired for ultimate precision over comfort. Tested in full race conditions on a front-running Mini Miglia (10-inch slick tyre circuit racer) with great success.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty race spec arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable in situ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft grade, Teflon-lined steel rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack phosphate coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe arms are prepared with a special black phosphate coating for improved longevity and are also fully rebuildable.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlso see the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e for precision setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460003164453,"sku":"MED-6452-LA","price":160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6452-la.jpg?v=1676572493"},{"product_id":"med-level-1-handling-pack","title":"MED LEVEL 1 HANDLING PACK","description":"\u003cp\u003eThe MED Level 1 handling pack includes a pair of our heavy-duty adjustable lower arms and tie-rods, which are aimed towards high performance trackday and competition Minis. We now include new fixings to connect the tie-rods to the lower arms.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit will allow you to precisely set both the caster and camber angles of the front suspension. This is key to maximising grip, increasing cornering speed and stability under braking.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA\u003cmeta charset=\"utf-8\"\u003eircraft grade, Teflon-lined steel rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack phosphate coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower arms adjustable in situ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong taper beam tie-rod design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel front tie-rod spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTie-rods machined from EN24T steel billet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial fixing bolts to connect tie-rods to lower arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are aimed primarily at trackday and competition cars where solid rod ends are desired for ultimate precision over comfort. Tested in full race conditions on a front-running Mini Miglia (10-inch slick tyre circuit racer) with great success.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf you'd also like a set of our precision ride height adjusters, please see the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/med-level-2-handling-pack\"\u003eMED Level 2 handling pack\u003c\/a\u003e. The \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e is a handy for precision DIY setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460003328293,"sku":"MED-6711-HP","price":365.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6711-hp_2.jpg?v=1676572546"},{"product_id":"mini-hub-nut","title":"MED EN24 STEEL CV\/HUB NUT","description":"\u003cp\u003eExclusive to MED, our CV castellated nut is machined from heat treated EN24T steel with extra attention to the split pin slots, where we have machined a radius to reduce fatigue cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe have further improved the design by including an in-built washer to the clamping face to give a larger clamping area. The nut is then heat treated further for extra tensile strength.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe have chosen a larger 34mm size to further increase the strength over the standard nut.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eYou may also wish to use one of our \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/hub-nut-split-washer-for-cv-joint\"\u003euprated hub nut split washers\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460006113573,"sku":"MED-3906-HN","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/files\/IMG_6929_fff2eb39-392b-4554-83af-e855a9a503ab.jpg?v=1779276998"},{"product_id":"billet-front-damper-mounts","title":"BILLET FRONT DAMPER MOUNTS","description":"\u003cp\u003eHigh quality billet aluminium front damper mounts for standard Minis with the inner wings still in place.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThese weigh just 690g a pair including the supplied fixings!\u003cbr\u003e\u003cbr\u003eAnodised in silver for longevity. \u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460006146341,"sku":"MED-6560-DM","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6560-dm.jpg?v=1676572896"},{"product_id":"med-competition-ride-height-adjusters","title":"MED COMPETITION RIDE HEIGHT ADJUSTERS","description":"\u003cp\u003eMED competition ride height adjusters are the ultimate setup for any classic Mini owner wishing to accurately adjust corner weights and ride height. This unique design features a CNC-machined and anodised billet aluminium spring platform with stainless steel adjusters and extension tubes for the rear radius arms.\u003cbr\u003e\u003cbr\u003eWe have designed the kit with the upmost quality, performance and durability in mind, and feel this gives a vast improvement over those currently available on the market.\u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003eFull diameter material below cone contact area for extra rigidity.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOverall diameter increased for greater cone contact area.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eImproved outer edge radius for better progression.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eAdjuster CNC-machined from stainless steel with 10mm hexagon for adjustment.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eAdjuster locknut CNC-machined with integral washer.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eRear extension tubes CNC-machined from stainless steel.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eSupplied with new knuckle joints and cups.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003eThe overall diameter has been increased, giving the rubber cone more support, while a change in both draft angle and outer edge radius now gives a more even progression.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe underside of the cone supporting flange has also been extended to stop flex. In addition, we have machined the central adjuster, locknut and rear extensions from stainless steel with an integral washer to stop the locknut cutting into the aluminium body. The central adjuster also has a 10mm hexagon for external adjustment.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460008472869,"sku":"MED-6563-AP","price":275.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6563-ap1.jpg?v=1676573030"},{"product_id":"ada-camber-caster-gauge","title":"ADA CAMBER\/CASTER GAUGE","description":"\u003cp\u003eA simple yet very effective camber\/caster gauge from ADA, which is ideal for those with adjustable lower arms and tie-rods.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eCorrect setup of the suspension geometry is critical to make the most of these adjustable components.\u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003eSupplied with instruction booklet. You will ideally need a flat patch to setup your geometry, although as explained in the instructions, it's possible to correct the figures to compensate for an uneven floor.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAn excellent tool to keep in the collection.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460009849125,"sku":"MED-6180-CG","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6180-cg.jpg?v=1676573211"},{"product_id":"quick-release-steering-boss-weld-on","title":"RACETECH QUICK-RELEASE STEERING BOSS - WELD-ON","description":"\u003cp\u003eThe Racetech quick-release steering boss is CNC manufactured using aircraft quality aluminium hard anodised for strength and durability.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eBoth male and female splines are precision gear cut incorporating a master spline for accurate alignment.\u003c\/p\u003e\n\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\n\u003cp\u003eAs trusted by motorsport competitors worldwide, this weld-on kit is designed for use with 6x70mm fitment steering wheels.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThe 19mm steel spline will need to be pinned and welded to a machined steering column shaft. We'd recommend this job is undertaken by an experienced fabricator.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460011258149,"sku":"MED-6000-WB","price":170.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6000-wb.jpg?v=1676573431"},{"product_id":"quick-release-steering-boss-bolt-on","title":"RACETECH QUICK-RELEASE STEERING BOSS - BOLT-ON","description":"\u003cp\u003eThe Racetech quick-release steering boss is CNC manufactured using aircraft quality aluminium hard anodised for strength and durability. \u003cbr\u003e\u003cbr\u003eBoth male and female splines are precision gear cut incorporating a master spline for accurate alignment. \u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003eAs trusted by motorsport competitors worldwide, this bolt-on kit is designed for use with 6x70mm fitment steering wheels.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis kit is intended for cars already fitted with an aftermarket 6x70mm PCD steering wheel boss, allowing you to convert to a removable wheel without needing to modify the steering column shaft.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460012732709,"sku":"MED-6001-BB","price":220.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6001-bb.jpg?v=1676574483"},{"product_id":"competition-track-rod-ends","title":"COMPETITION TRACK ROD ENDS","description":"\u003cp\u003eThese track rod ends are approximately 5mm longer than standard, to give better thread engagement when running lower ride height and increased negative camber.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSupplied as a pair, to suit the standard type Mini steering rack and arms.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460013748517,"sku":"MED-6566-TR","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/trackrodends.jpg?v=1676574644"},{"product_id":"med-level-2-handling-pack","title":"MED LEVEL 2 HANDLING PACK","description":"\u003cp\u003eThe MED Level 2 handling pack includes a pair of our heavy-duty adjustable lower arms, tie-rods and ride height adjusters. We now include new fixings to connect the tie-rods to the lower arms.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit will allow you to precisely set both the caster and camber angles of the front suspension, while also adjusting ride height and corner weights. This is key to maximising grip, increasing cornering speed and stability under braking.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined alloy height platforms with stainless adjusters and shafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegral 10mm hex sockets for on-car adjustable ride height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft grade, Teflon-lined steel rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack phosphate coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower arms adjustable in situ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong taper beam tie-rod design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel front tie-rod spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTie-rods machined from EN24T steel billet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial fixing bolts to connect tie-rods to lower arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is aimed primarily at trackday and competition cars where solid rod ends are desired for ultimate precision over comfort. Tested in full race conditions on a front-running Mini Miglia (10-inch slick tyre circuit racer) with great success.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo adjust ride height in situ with 10mm hex bar, you will need to drill the front tower bolts and lightly modify the rear subframe\/valance panel. Please contact us for further advice. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf you'd also like a set of competition rubber springs (cones), please see the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/level3-handling-pack\"\u003eMED Level 3 handling pack\u003c\/a\u003e. The \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e is a handy for precision DIY setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460014076197,"sku":"MED-6722-HP","price":605.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6722-hp.jpg?v=1676574712"},{"product_id":"mini-anti-rollbar","title":"CLASSIC MINI REAR ANTI-ROLL BAR","description":"\u003cp\u003eThe 3\/4-inch diameter rear anti-roll bar kit is a highly effective bolt-on upgrade to further enhance cornering ability by reducing unwanted body roll. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eIn basic terms, stiffening the rear suspension helps to increase oversteer - improving the overall balance of the Mini which otherwise tends to understeer. The ARB kit achieves this without resorting to rock hard suspension cones and ruining the ride quality. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis kit suits all performance road and competition Minis with rear drum brakes.\u003c\/p\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eTech specs:\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e\u003cli\u003e3\/4-inch diameter zinc-plated rear bar\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eReplaceable poly mounting blocks\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eHigh performance bladed design\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eSuited to Minis with rear drum brakes\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eThree drop link positions\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eBolt-on upgrade\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cbr\u003e\u003cp\u003eCombined with our range of \u003ca href=\"https:\/\/www.med-engineering.co.uk\/collections\/suspension\"\u003ehigh performance adjustable suspension components\u003c\/a\u003e, you will be able to truly perfect your Mini's handling. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eMade for us in the UK by Kent Auto Developments. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460018794789,"sku":"MED-6580-ARB","price":315.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6580-arb2.jpg?v=1676574782"},{"product_id":"front-subframe-mounts","title":"SOLID FRONT SUBFRAME MOUNTS","description":"\u003cp\u003eThese solid aluminium front subframe mounts replace the standard rubber-equipped mounts on Minis from 1976 onwards, which sit between the toe board and rear of the front subframe.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThe standard rubber type help to reduce road noise, at the expense of pin sharp handling. So for all performance road and track Minis, we'd recommend upgrading to solid subframe mounts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eYou may also wish to install a solid front subframe mounting kit\u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/front-subframe-mount-kit\"\u003e,\u003c\/a\u003e which replaces the tower bolt rubbers and front panel mounts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eSupplied with all fixings required.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460020990245,"sku":"MED-6771-SM","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/med-6771-sm.jpg?v=1676574863"},{"product_id":"split-pin-mini","title":"MED HUB NUT SPLIT PIN SET","description":"\u003cp\u003eA set of high quality split pins, or cotter pins, to suit the Mini outer CV joint\/hub nut.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSupplied in a pack of 20.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":44460021711141,"sku":"MED-3907-HNP","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/splitpins.jpg?v=1676574959"},{"product_id":"nitron-mini-dampers","title":"MED NITRON NTR RACE DAMPERS","description":"\u003cp\u003eDeveloped exclusively for us by the suspension experts at Nitron, these high quality aluminium-body dampers are designed for full-race, trackday and hillclimb classic Minis.\u003cbr\u003e\u003cbr\u003eA precise single adjuster gives highly effective two-way damping adjustment, with 3\/8-inch spherical mounting points, or eyes, to suit the standard Mini damper pins front and rear. \u003cbr\u003e\u003cbr\u003eHand built in the UK and valved specifically to suit the Mini's unusual rubber spring suspension, they are fully serviceable. Attractive anodised alloy bodies protect against corrosion whilst reducing weight, while hard-anodised titanium finishing parts are used to ensure dampers last season after season.\u003cbr\u003e\u003cbr\u003eInternally, the ultra-low friction components offer consistent, fade-resistant performance and a long service life. \u003cbr\u003e\u003cbr\u003eWe offer two lengths for the rear dampers, depending on your ride height requirements.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen\/Closed lengths\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFront open 302mm open \/ 226mm closed \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRace spec rear dampers - 279mm open \/ 219mm closed\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRoad spec rears dampers - 385.25mm open \/ 261.25mm closed \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe short rear dampers are aimed towards full competition Minis with a sill lip height of around 7.5-8\" at the rear, and the longer road length to suit around 9.5-10\". \u003c\/p\u003e\n\u003cp\u003eThe front length is the same for either set. If running especially low ride height (6.5-7\" front) with bump stops removed, modified front top mounts may be necessary. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech spec\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle adjuster for bump and rebound\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCustom MED valving setup\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightweight anodised aluminium bodies (steel also available)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHard-anodised titanium finishing parts \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh quality low-friction internal components\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully serviceable\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3\/8\" diameter mounting eyes \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTesting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese were initially tested on a powerful hillclimb\/sprint Mini on slick racing tyres to get to grips with valving for a rubber-sprung competition car. Feedback was very positive, and the driver could really push on through tighter corners where the previous setup did not inspire confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNext these were installed on a front-running Mini Se7en at Cadwell Park, one of the UK's most technically demanding circuits. Back-to-back with the previous known-good dampers, it was particularly noticeable how effective the adjusters were; the difference of just two clicks of adjustment could be felt very clearly in the balance of the car.  \u003cbr\u003e\u003cbr\u003eWith this Mini's handling already fine-tuned, it was still possible to extract more performance from the dampers alone. Four sessions in mixed weather conditions later, we had a good feel of the optimum settings for the car. \u003cbr\u003e\u003cbr\u003eOver the next four races, the driver achieved a win, fastest lap and two second place finishes. Understandably he decided to keep the test dampers fitted as a permanent addition! \u003cbr\u003e\u003cbr\u003eWe can now offer dampers with these exact specifications, on the shelf ready to go.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Full race","offer_id":54601241887105,"sku":"MED-6567-NTR-1","price":1550.0,"currency_code":"GBP","in_stock":false},{"title":"Road","offer_id":54601241919873,"sku":"MED-6567-NTR-2","price":1550.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/products\/nitron.jpg?v=1676574990"},{"product_id":"rear-camber-brackets","title":"MINI ADJUSTABLE REAR CAMBER BRACKETS","description":"\u003cp\u003eHeavy-duty rear radius arm brackets for the classic Mini, which allow precise adjustment of the rear wheel camber angle via serrated outer plates.\u003c\/p\u003e\n\u003cp\u003eEach serration equates to 0.5 degrees of camber adjustment, so you can change the Mini's standard (and often uneven) positive camber setup to a more effective negative camber angle. \u003c\/p\u003e\n\u003cp\u003eFine adjustment to tracking angles can be made by changing the number of shims between the brackets and the subframe. This gives the strongest possible setup.\u003cbr\u003e\u003cbr\u003eWe make a special \u003ca href=\"https:\/\/www.med-engineering.co.uk\/collections\/wheels-suspension\/products\/mini-radius-arm-tracking-shim-set\"\u003estainless steel Mini rear tracking shim set\u003c\/a\u003e to allow precise adjustment of the rear toe-in\/out, which can be selected as an add-on, above.\u003c\/p\u003e\n\u003chr\u003e\u003cbr\u003e\n\u003cp\u003eAlso see the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e for precision setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Camber brackets","offer_id":47245822198053,"sku":"MED-6568-CB","price":165.0,"currency_code":"GBP","in_stock":false},{"title":"Plus MED tracking shim pack","offer_id":47245822230821,"sku":"MED-6568-CB +  MED-6569-TS","price":185.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/files\/MED-6568-CB.jpg?v=1697100218"},{"product_id":"mini-radius-arm-tracking-shim-set","title":"MED MINI REAR TRACKING SHIM SET","description":"\u003cp\u003eHigh quality stainless steel shims for the Mini rear radius arms, which can be inserted between the radius arm bracket (aka camber\/tracking brackets) and the subframe, to adjust the rear tracking angles.\u003c\/p\u003e\n\u003cp\u003eInserting a shim will reduce the toe-in on that side, so you can evenly match tracking left to right and optimise the handling. \u003cbr\u003e\u003cbr\u003eWith different subframes and radius arms, this can vary quite significantly from one Mini to another, so it is well worth spending some time to get this set correctly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003eWe would highly recommend combining the MED shim pack with the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/collections\/wheels-suspension\/products\/rear-camber-brackets\"\u003eAdjustable Rear Camber Brackets\u003c\/a\u003e to give complete control over the rear suspension geometry.\u003c\/p\u003e\n\u003cp\u003eThe set includes eight shims in total, half 0.5mm thick, half 0.9mm thick. \u003cbr\u003e\u003cbr\u003eFor reference, with 10-inch wheels this will reduce toe-in\/increase toe-out by the same value, so 0.5mm or 0.9mm depending on the shim. \u003c\/p\u003e\n\u003cp\u003eAlso see the \u003ca href=\"https:\/\/www.med-engineering.co.uk\/products\/ada-camber-caster-gauge\"\u003eADA Camber\/Caster Gauge\u003c\/a\u003e for precision suspension setup.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Shim pack","offer_id":47245801750821,"sku":"MED-6569-TS","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"Plus camber brackets","offer_id":47245801783589,"sku":"MED-6569-TS + MED-6568-CB","price":175.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/files\/Shim-Pack.jpg?v=1698240027"},{"product_id":"med-competition-driveshaft-kit-pot-joint","title":"MED COMPETITION DRIVESHAFT KIT - POT JOINT","description":"\u003cp\u003eThe MED Competition Driveshaft Kit is the ultimate upgrade package for your standard driveshafts, for fast road or competition usage.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is aimed at those using 10-inch wheels with pot joint output shafts. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMED heavy-duty 300M driveshafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality pot joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality 1275 CV joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition EN24T drive flanges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMED Competition CV joint nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Default Title","offer_id":55368701542785,"sku":"MED-3913-PDK","price":695.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/files\/PotJointKit_941addae-6af9-476c-bd8c-1ae07a7cd31d.jpg?v=1772105281"},{"product_id":"mini-outer-cv-joint-gaiter","title":"MINI OUTER CV JOINT GAITER","description":"\u003cp\u003eA high quality CV joint gaiter kit to suit our \u003ca href=\"https:\/\/www.med-engineering.co.uk\/collections\/drivetrain\/products\/cv-joint-1275\"\u003eheavy duty classic Mini CV joints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSupplied with two clips, a wire clip for the CV spline and sachet of grease.\u003c\/p\u003e\n\u003cp\u003eThese are priced individually - two required per car.\u003c\/p\u003e","brand":"MED Engineering","offers":[{"title":"Gaiter kit only","offer_id":55469065830785,"sku":"MED-3909-CG","price":9.5,"currency_code":"GBP","in_stock":true},{"title":"Plus MED EN24T hub nut","offer_id":55469065863553,"sku":"MED-3909-CG + MED-3906-HN","price":34.5,"currency_code":"GBP","in_stock":true},{"title":"Plus MED hub nut and split washer","offer_id":55469065896321,"sku":"MED-3909-CG + MED-3906-HN + MED-3905-SW","price":49.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/files\/CV-boot_ca09b5a7-9a59-44a4-a7a3-08f55f4e3de8.jpg?v=1774450151"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0114\/0005\/collections\/My_project-1_6.jpg?v=1681903369","url":"https:\/\/www.med-engineering.co.uk\/collections\/brakes-suspension.oembed","provider":"MED Race Technologies","version":"1.0","type":"link"}